PNDS / Marking codes / 1E

Identify an unknown SMD part: marking code “1E”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 19 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BC847A	NXP	SOT-23	Public marking directory
BC847AT	MCC	SOT-416	Public marking directory
BC847AT	PHI	SC-75/ SOT416	Public marking directory
BC847AW	DIODES	—	Public marking directory
BC847AW	MCC	SOT-323	Public marking directory
BC847B	MCC	SOT-23	Public marking directory
BU4345F	ROHM ^*	SOP-4	Public marking directory
BU4345FWE	ROHM ^*	VSOF-5	Public marking directory
BU4345G	ROHM ^*	SSOP-5	Public marking directory
FMMT-A43	FERRANTI	—	Public marking directory
KST43	FSC	SOT-23	Public marking directory
MM5Z62V	FSC	SOD-523	Public marking directory
MMBTA43	FSC	SOT-23	Public marking directory
R3111N411A	RICOH ^*	SOT-23-5	Public marking directory
RH5RL51AA	RICOH ^*	SOT-89	Public marking directory
RN5RL51AA	RICOH ^*	SOT-23-5	Public marking directory
RQ5RW16BA	RICOH ^*	SOT-143R	Public marking directory
SMBTA43	SIEMENS	SOT-23 16ta - 3a Inf	Public marking directory
SXTA43	INFINEON	SOT-89	Public marking directory
BC847AF	—	SOT-490	Public marking directory
FMMTA43	—	SOT-23	Public marking directory
MM3Z3V0	—	SOD-323	Public marking directory
MM3Z62V	—	SOD-323	Public marking directory
R1161D121B5	—	—	Public marking directory
R3131N29EC3	—	SOT-23	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “1”

10 11 12 13 14 15 16 18 1A 1B

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.