PNDS / Marking codes / 1K

Identify an unknown SMD part: marking code “1K”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

20 candidates 10 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BC848B	PHI	SOT-23	Public marking directory
BC848BF	INFINEON	SOT-490	Public marking directory
BC848BT	PHI	SOT-416	Public marking directory
BC848BT	PHI	SC-75	Public marking directory
BC848BW	INFINEON	SOT-323	Public marking directory
FMMT4400	FERRANTI	SOT23	Public marking directory
KST6428	FSC	SOT-23	Public marking directory
MMBT6428	FSC	SOT23	Public marking directory
R3111N211C	RICOH ^*	SOT-23-5	Public marking directory
RH5RE31AA	RICOH ^*	SOT-89	Public marking directory
BC848BDW	—	SOT-363	Public marking directory
CH848BPT-Q	—	SOT-23 16ta - 3a Chm	Public marking directory
MM3Z4V3	—	SOD-323	Public marking directory
R1161D111D	—	—	Public marking directory
R3131N29EA3	—	SOT-23	Public marking directory
R3132Q29EA	—	SOT-143	Public marking directory
R5326N010A	—	SOT-23-6	Public marking directory
XC6127N29BNR	—	SSOT-24	Public marking directory
XC6213B17ANR	—	SSOT-24	Public marking directory
XC6217C182NR	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “1”

10 11 12 13 14 15 16 18 1A 1B

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.