PNDS / Marking codes / 1M

Identify an unknown SMD part: marking code “1M”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

24 candidates 11 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BC807-16	NXP	SOT-23 16ta - 3f Kec	Public marking directory
BC847CW	DIODES	—	Public marking directory
BC848	PHI	SOT-23	Public marking directory
BC848W	PHI	SOT-323	Public marking directory
FMMT-A13	FERRANTI	SOT23	Public marking directory
IMP161MCUS	IMP ^*	SOT-143	Public marking directory
KST13	FSC	SOT-23	Public marking directory
MMBTA13	FSC	SOT-23	Public marking directory
R3111N411C	RICOH ^*	SOT-23-5	Public marking directory
RH5RE51AA	RICOH ^*	SOT-89	Public marking directory
SMBTA13	INFINEON	SOT-23 16ta - 3a Inf	Public marking directory
2SD2357	—	SOT-89	Public marking directory
BC807A-16	—	SOT-23 16ta - 3f Kec	Public marking directory
BC846T	—	SOT-416 16ta - 3a Phi	Public marking directory
FMMTA13	—	SOT-23	Public marking directory
IMBT3903	—	SOT-23	Public marking directory
MM3Z4V7	—	SOD-323	Public marking directory
R1161D311D	—	—	Public marking directory
R3131N44BC	—	SOT-23	Public marking directory
R3133Q21EA	—	SOT-143	Public marking directory
R5326N012A	—	SOT-23-6	Public marking directory
XC6127N33BNR	—	SSOT-24	Public marking directory
XC6213B19ANR	—	SSOT-24	Public marking directory
XC6217C202NR	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “1”

10 11 12 13 14 15 16 18 1A 1B

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.