PNDS / Marking codes / 2D

Identify an unknown SMD part: marking code “2D”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 11 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1PS59SB20	NXP	SC-59	Public marking directory
KST92	FSC	SOT-23	Public marking directory
MMBTA92	FSC	SOT-23	Public marking directory
MMBTH10	MCC	SOT-23	Public marking directory
R3111N321A	RICOH ^*	SOT-23-5	Public marking directory
RH5RL42AA	RICOH ^*	SOT-89	Public marking directory
RN5RL42AA	RICOH ^*	SOT-23-5	Public marking directory
RN5VD32CA	RICOH ^*	SOT-23-5	Public marking directory
RQ5RW23AA	RICOH ^*	SOT-143R	Public marking directory
SMBTA92	INFINEON	SOT-23 16ta - 3a Inf	Public marking directory
SXTA92	ZETEX	SOT-89	Public marking directory
2SK3064	—	SOT-323	Public marking directory
KDZ2.7EV	—	SOD-523	Public marking directory
KDZ2.7V	—	SOD-323	Public marking directory
KIA7225F	—	SOT-89	Public marking directory
MBTA92	—	SOT-23	Public marking directory
MM3Z12V	—	SOD-323	Public marking directory
MMBD914PT	—	SOT-23 16dc - 3a Chm	Public marking directory
MMBT92	—	SOT-23	Public marking directory
R1161D321A	—	—	Public marking directory
R3131N42EC	—	SOT-23	Public marking directory
R3132Q33EA	—	SOT-143	Public marking directory
USCD022	—	0603	Public marking directory
XC6127N21CNR	—	SSOT-24	Public marking directory
XC6213B23ANR	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “2”

20 22 24 25 27 2B 2C 2F 2M 23

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.