PNDS / Marking codes / 4C

Identify an unknown SMD part: marking code “4C”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 9 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BC859C	NXP	SOT-23	Public marking directory
FMMV3102	ZETEX	SOT-23	Public marking directory
MMSZ2V4	ON ^*	SOD-123	Public marking directory
MMVB3102	MOT	SOT23	Public marking directory
R3111N241A	RICOH ^*	SOT-23-5	Public marking directory
RH5RL34AA	RICOH ^*	SOT-89	Public marking directory
RN5RL34AA	RICOH ^*	SOT-23-5	Public marking directory
RQ5RW42AA	RICOH ^*	SOT-143R	Public marking directory
UNRF1A9	PANASONIC ^*	ML3 22ta - 2b Pan	Public marking directory
2SC4239	—	SOT-323	Public marking directory
3SK200	—	SOT-143	Public marking directory
3SK269	—	SOT-343	Public marking directory
KIA7423F	—	SOT-89	Public marking directory
MA79	—	SOD-123	Public marking directory
MM1Z2V4	—	SOD-123	Public marking directory
MMVL3102	—	SOD-323	Public marking directory
R1161D241A	—	—	Public marking directory
R3131N34EC	—	SOT-23	Public marking directory
RN5VD24CA	—	SOT-23-5	Public marking directory
USCD034	—	0603	Public marking directory
VD6	—	—	Public marking directory
VD7	—	—	Public marking directory
VR1	—	—	Public marking directory
XC6127N19ENR	—	SSOT-24	Public marking directory
XC6213B42ANR	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “4”

482I 43 44 45 47 4B 4D 46 4E 40

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.