PNDS / Marking codes / 5D

Identify an unknown SMD part: marking code “5D”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 17 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1N914W	MCC	SOD-123	Public marking directory
BC807	PHI	SOT-23	Public marking directory
BC807W	PHI	SOT-323 16ta - 3a PhH	Public marking directory
FMMD914	FERRANTI	SOT-23	Public marking directory
HD2A	FERRANTI	SOT-23	Public marking directory
MMBD914	FS	SOT23	Public marking directory
MMBT2222A	MCC	SOT-23	Public marking directory
MMDL914	MCC	SOD-323	Public marking directory
MMDT2222A	MCC	SOT-363	Public marking directory
MMSD914	FSC	SOD-123	Public marking directory
MMSS8050	MCC	SOT-23	Public marking directory
MMSZ12	ON ^*	SOD-123	Public marking directory
R3111N351A	RICOH ^*	SOT-23-5	Public marking directory
RH5RL45AA	RICOH ^*	SOT-89	Public marking directory
RN5RL45AA	RICOH ^*	SOT-23-5	Public marking directory
RN5VD35CA	RICOH ^*	SOT-23-5	Public marking directory
RQ5RW53AA	RICOH ^*	SOT-143R	Public marking directory
FT533Di	—	SOT-89	Public marking directory
MM1Z12	—	SOD-123	Public marking directory
MMBD914L	—	SOT-23	Public marking directory
R3131N45EC	—	SOT-23	Public marking directory
R3132Q13EC	—	SOT-143	Public marking directory
TCMM5Z8V2	—	SOD-523	Public marking directory
TMPD4148	—	SOT-23	Public marking directory
TMPD914	—	SOT-23	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “5”

51 5A 5B 5C 52 5H 55 56 5E 5F

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.