PNDS / Marking codes / 85

Identify an unknown SMD part: marking code “85”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

13 candidates 8 with manufacturer source-traceable

Candidate part numbers

Part numberManufacturerPackageMapping source
1PS70SB85 PHI SOT-323 Public marking directory
BAT68-05 INFINEON SOT-23 Public marking directory
EDZ22B ROHM SOD-523 Public marking directory
MA4CS102A MACOM SOT23 Public marking directory
MMBD1701 NSC — Public marking directory
RN5RF35BA RICOH * SOT-23-5 Public marking directory
RN5RZ35BA RICOH * SOT-23-5 Public marking directory
UDZS22B ROHM * — Public marking directory
CHDTA115EMPT — SOT-723 18ta - 3a Chm Public marking directory
TDZ22B — — Public marking directory
VDZS22B — — Public marking directory
XC6217D36ANR — SSOT-24 Public marking directory
XC6223A15BNR-G — SSOT-24 Public marking directory

How we narrow this down

  1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
  2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
  3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
  4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
  5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Other codes starting with “8”

8A8B8C8D8E8F8H8K8L8N
Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. * Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.