PNDS / Marking codes / AH

Identify an unknown SMD part: marking code “AH”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 13 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SS345	SANYO	SOT-23	Public marking directory
BCP53	MISTRAL	SOT-223	Public marking directory
BCX53	PHI	SOT-89	Public marking directory
BCX53	PHI	SC-62/SOT89	Public marking directory
BCX70H	FSC	SOT23	Public marking directory
BCX70J	MCC	SOT-23	Public marking directory
MAX6314US43D1-T	MAX ^*	SOT-143	Public marking directory
MMBZ5231B	FS	SOT-23 16dc - 3a Lge	Public marking directory
MMSZ5247B	FSC	SOD-123	Public marking directory
P6SMBJ6.5C	LITTLE ^*	DO-214AA	Public marking directory
RN5RT27AA	RICOH ^*	SOT-23-5	Public marking directory
ZMV930	ZETEX	SOD323	Public marking directory
ZMV930TA	ZETEX	SOD-323	Public marking directory
2SB1000-H	—	SOT-89	Public marking directory
74AHC1G86	—	SOT-353	Public marking directory
AP431IAQ	—	SOT-23-5	Public marking directory
BZX884-B11	—	SOD-882	Public marking directory
ELM99271B	—	SOT-89	Public marking directory
GS6333UR16D1	—	SOT-23	Public marking directory
MAZU240-H	—	SOT-346	Public marking directory
P4SMA8.2	—	DO-214AC	Public marking directory
R1141Q171B	—	SOT-143R	Public marking directory
RP130Q181A5	—	SC-82AB	Public marking directory
RT9161-31CX	—	SOT-89	Public marking directory
RT9161-37CV	—	SOT-23	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “A”

AL AH-16 A1 A2 A3 A4 A5 A6 A7 A8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.