PNDS / Marking codes / C6

Identify an unknown SMD part: marking code “C6”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 13 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BZX585-B3V9	NXP	SOD-523	Public marking directory
BZX884-B27	NXP	SOD-882	Public marking directory
ILC5062IC26X	FSC ^*	SC-70	Public marking directory
ILC5062M26X	FSC ^*	SOT-23	Public marking directory
MMBA811C6	MOT	SOT-23	Public marking directory
R3111N262A	RICOH ^*	SOT-23	Public marking directory
R3113D361A	RICOH ^*	—	Public marking directory
R3114Q331A	RICOH ^*	SC-82AB	Public marking directory
RN1907AFS	TOS ^*	—	Public marking directory
TC1054-5.0VCT713	MIC ^*	SOT-23-5	Public marking directory
TC4SU69F	TOS	SOT-353	Public marking directory
TC54VC2602ECB	MIC ^*	SOT-23	Public marking directory
TC54VC2602MB	MIC ^*	SOT-89	Public marking directory
2SA811-6	—	SOT-23	Public marking directory
AP130-47TW	—	—	Public marking directory
AP130-47W	—	SOT-23	Public marking directory
AP130-47Y	—	SOT-89	Public marking directory
BZT52H-C75	—	SOD123F	Public marking directory
ELM9726NAB	—	SOT-89	Public marking directory
ELM9846AB	—	SOT-89	Public marking directory
KTA2017-6	—	USM 16ta - 3a Kec	Public marking directory
MMSZ5265B	—	SOD-123	Public marking directory
R1111N461A	—	SOT-23-5	Public marking directory
R1140Q361B	—	SOT-143R	Public marking directory
R1160D261A	—	—	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “C”

C0 C1 C2 C3 C4 C5 C7 C8 C9 CA

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.