Identify an unknown SMD part: marking code “D”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

13 candidates 8 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SS376	ROHM	SOT-323	Public marking directory
BAS21-03W	INFINEON	SOD323	Public marking directory
BB659	INFINEON	—	Public marking directory
MBRX02560	MCC	SOD-323	Public marking directory
MRF577	MOT	SOT323	Public marking directory
RB521G-30	MCC	SOD-723	Public marking directory
RB551V-30	JIANGSU CHANJIANG ELECTRONICS	SOD-323	Public marking directory
RB706F-40	MCC	SOT-323	Public marking directory
2SK2219	—	SOT-323	Public marking directory
3SK304	—	SOT-143	Public marking directory
3SK308	—	SOT-343	Public marking directory
GBLC12I	—	SOD-323	Public marking directory
Si1013R	—	SC-75A	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “D”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.