PNDS / Marking codes / DE

Identify an unknown SMD part: marking code “DE”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 14 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BD4824FVE	ROHM ^*	VSOF-5	Public marking directory
BD4824G	ROHM ^*	SSOP-5	Public marking directory
BFN18	INFINEON	SOT-89	Public marking directory
BZX384-C16	PHI	SOD-323	Public marking directory
MAX6314US34D2-T	MAX ^*	SOT-143	Public marking directory
MMBZ4697	VISHAY ^*	SOT-23	Public marking directory
MMSZ4697	FSC	SOD-123	Public marking directory
P6SMBJ54AC	LITTLE ^*	DO-214AA	Public marking directory
R3112Q341A	RICOH ^*	SC-82AB	Public marking directory
RN5RT54AA	RICOH ^*	SOT-23-5	Public marking directory
SM6T6V8A	ST	DO-214AA	Public marking directory
SSM3J01F	TOS	SOT-23	Public marking directory
UNR31AA	PANASONIC ^*	—	Public marking directory
ZMV833	ZETEX ^*	SOD-323	Public marking directory
2SA1037AK-LNE	—	SOT-346	Public marking directory
2SC2463-E	—	SOT-23	Public marking directory
2SC3441-E	—	SC-59	Public marking directory
2SC3444-E	—	SOT-89	Public marking directory
2SD1419-DE	—	SOT-89	Public marking directory
2SD1419-E	—	SOT-89	Public marking directory
2SD1834	—	SOT-89	Public marking directory
AP131-19TW	—	—	Public marking directory
AP131-19W	—	SOT-23-5L	Public marking directory
AP131-19Y	—	SOT-89-5L	Public marking directory
Anode1	—	—	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “D”

D0 D1 D2 D3 D4 D5 D6 D7 D8 D9

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.