Identify an unknown SMD part: marking code “DO”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

16 candidates 8 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
2SA1201-O	MCC	SOT-89	Public marking directory
2SA1201-Y	MCC	SOT-89	Public marking directory
2SA1620-O	TOS	SOT-23	Public marking directory
2SC5092-O	TOS	SMQ	Public marking directory
2SC5343U-O	TOS *	SOT-323 16ta - 3a Auk	Public marking directory
2SC5343UF-O	TOS *	SOT-323F 18ta - 3a Auk	Public marking directory
2SD1997	PANASONIC *	PCP	Public marking directory
MAX6314US28D2-T	MAX *	SOT-143	Public marking directory
AAT3526ICX-2.93-200	—	SOT-143	Public marking directory
AP131-29TW	—	—	Public marking directory
AP131-29W	—	SOT-23-5L	Public marking directory
AP131-29Y	—	SOT-89-5L	Public marking directory
K1/K2	—	—	Public marking directory
KTA1661-O	—	SOT-89	Public marking directory
SiP809CMEUADT	—	SOT-23	Public marking directory
V6310OSP5B	—	SOT-23-5	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “D”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.