PNDS / Marking codes / DZ

Identify an unknown SMD part: marking code “DZ”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

21 candidates 8 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BCW68HR	SGS	SOT23R	Public marking directory
BCW68RH	SIEMENS	SOT-23	Public marking directory
MAX6314US43D3-T	MAX ^*	SOT-143	Public marking directory
MMBZ4709	VISHAY ^*	SOT-23	Public marking directory
P6SMBJ100AC	LITTLE ^*	DO-214AA	Public marking directory
TC1055-2.8VCT713	MIC ^*	SOT-23-5	Public marking directory
XC61119C39ANR-G	TOREX ^*	SSOT-24 26gh VD3 5c Tor	Public marking directory
XC6119C39ANR	TOREX ^*	SSOT-24	Public marking directory
AP131-40TW	—	—	Public marking directory
AP131-40W	—	SOT-23-5L	Public marking directory
AP131-40Y	—	SOT-89-5L	Public marking directory
CD214B-T100CA	—	DO-214AA	Public marking directory
MMSZ4709	—	SOD-123	Public marking directory
R5220D042B	—	—	Public marking directory
RT9809-48CV	—	SOT-23 16vdc VD7 3a Rct	Public marking directory
SiP809CLEUDDT	—	SOT-23	Public marking directory
TCMM3Z8V2B	—	SOD-323F	Public marking directory
TV06B101JB	—	DO-214AA	Public marking directory
XC6109C39AN	—	SSOT-24	Public marking directory
XC6127C53JNR	—	SSOT-24	Public marking directory
XC6127N54DNR	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “D”

D0 D1 D2 D3 D4 D5 D6 D7 D8 D9

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.