PNDS / Marking codes / E8

Identify an unknown SMD part: marking code “E8”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 10 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BZX84C3V0	DIODES	SOT-23 16dc - 3a Lge	Public marking directory
MM5Z3V9	FSC	SOD-523	Public marking directory
R3111N482A	RICOH ^*	SOT-23	Public marking directory
R3113D181C	RICOH ^*	—	Public marking directory
TC1072-2.85VCH	MIC ^*	SOT-23-6	Public marking directory
TC54VC4802ECB	MIC ^*	SOT-23	Public marking directory
TC54VC4802MB	MIC ^*	SOT-89	Public marking directory
TC7S86F	TOS	SOT-23-5	Public marking directory
TC7S86FU	TOS	SOT-353	Public marking directory
ZC2811E	FERRANTI	—	Public marking directory
AP1704BTW	—	—	Public marking directory
AP1704BW	—	SOT-23-3L	Public marking directory
BZX585-B12	—	SOD-523	Public marking directory
ELM9748NAB	—	SOT-89	Public marking directory
R1111N181A	—	SOT-23-5	Public marking directory
R1140Q181D	—	SOT-143R	Public marking directory
R1160D081B	—	—	Public marking directory
R1180Q281C	—	SC-82AB	Public marking directory
RD74LVC1G86WPE	—	—	Public marking directory
RN5VD48AA	—	SOT-23-5	Public marking directory
RT9167-23CB	—	SOT-23-5	Public marking directory
TS810RCXB	—	SOT-23	Public marking directory
XC61CC4802M	—	SOT-23	Public marking directory
XC61CC4802N	—	SOT-143R	Public marking directory
XC61CC4802P	—	SOT-89	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “E”

EK EV E0 E1 E2 E3 E4 E5 E6 E9

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.