Identify an unknown SMD part: marking code “FY”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

17 candidates 6 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
2SA1202-Y	TOS	SOT-89	Public marking directory
2SC5344U-Y	TOS *	SOT-323 18ta - 3a Auk	Public marking directory
MAX6315US49D1-T	MAX *	SOT-143	Public marking directory
SM6T100A	ST	DO-214AA	Public marking directory
UNR2226	PANASONIC *	SC-59	Public marking directory
UNR5226	PANASONIC *	SOT-523	Public marking directory
2SB1571-Y	—	SOT-89	Public marking directory
2SC2716-Y	—	SOT-23	Public marking directory
2SC3661	—	SOT-23	Public marking directory
2SK1698	—	SOT-89	Public marking directory
KTA1662-Y	—	SOT-89	Public marking directory
KTA2013F-Y	—	TFSM 19ta - 3f Kec	Public marking directory
SiP810C27EUDT	—	SOT-23	Public marking directory
UN2226	—	SC-59	Public marking directory
XC6127C52ANR	—	SSOT-24	Public marking directory
XC6127N52FNR	—	SSOT-24	Public marking directory
XC6224A291NR	—	SSOT-24	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “F”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.