Identify an unknown SMD part: marking code “G1”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 12 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1PS79SB30	NXP	SOD-523	Public marking directory
BFS20	PHI	SOT23	Public marking directory
MMBT5551	FS	SOT-23	Public marking directory
MMBTA05	MCC	SOT-23	Public marking directory
MMSZ5226B	FSC	SOD-123	Public marking directory
MMSZ5226BS	DIODES	SOD-323	Public marking directory
MMSZ5226BS	DIODES	—	Public marking directory
MMSZ5227B	DIODES	—	Public marking directory
R3113D311C	RICOH *	—	Public marking directory
R3114Q181C	RICOH *	SC-82AB	Public marking directory
TC7SET00F	TOS	SOT-353	Public marking directory
TC7SET00FU	TOS	SOT-353	Public marking directory
3T064AA	—	DO-214AA	Public marking directory
D70Y1.5T1	—	SOT-89	Public marking directory
ELM7631HBB	—	SOT-23 16vdc VD7 3d Elm	Public marking directory
FRS2A	—	DO-214AA	Public marking directory
R1111N311B	—	SOT-23-5	Public marking directory
R1131D111A	—	—	Public marking directory
R1140Q311D	—	SOT-143R	Public marking directory
R1160D211B	—	—	Public marking directory
R3130N21EA	—	SOT-23	Public marking directory
RP103Q131B	—	SC-82AB	Public marking directory
RT9161A-16CX	—	SOT-89	Public marking directory
RT9166-33CVL	—	SOT-23	Public marking directory
S1/S2	—	—	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “G”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.