PNDS / Marking codes / HL

Identify an unknown SMD part: marking code “HL”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 15 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
2SC3862	TOS	SOT-23	Public marking directory
2SD1006-L	NEC ^*	SOT-89	Public marking directory
74HC1G66GW	PHI	SOT-353	Public marking directory
BU4819F	ROHM ^*	SOP-4	Public marking directory
BU4819FWE	ROHM ^*	VSOF-5	Public marking directory
BU4819G	ROHM ^*	SSOP-5	Public marking directory
DDZ9692	DIODES	SOD-123	Public marking directory
DDZ9692S	DIODES	SOD-323	Public marking directory
DDZ9692S	DIODES	—	Public marking directory
DDZ9693	DIODES	—	Public marking directory
DDZX9692	DIODES ^*	SOT-23	Public marking directory
DDZX9692TS	DIODES	SOT-363	Public marking directory
DDZX9692W	DIODES ^*	SOT-323	Public marking directory
R1112N401B	RICOH ^*	SOT-23-5	Public marking directory
UNR32AA	PANASONIC ^*	—	Public marking directory
2SA1502	—	SOT-23	Public marking directory
2SA1722	—	SOT-323	Public marking directory
3T310C	—	DO-214AA	Public marking directory
AAT3527ICX-4.38-200	—	SOT-143	Public marking directory
AP130-45R	—	SOT-23	Public marking directory
AP130-45YR	—	SOT-89	Public marking directory
P4SMAJ7.0	—	DO-214AC	Public marking directory
XC6127C32BNR	—	SSOT-24	Public marking directory
XC6127N32GNR	—	SSOT-24	Public marking directory
XC6223F351NR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “H”

H0 H1 H2 H3 H4 H5 HA HC HD HE

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.