PNDS / Marking codes / HU

Identify an unknown SMD part: marking code “HU”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

18 candidates 12 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BU4827F	ROHM ^*	SOP-4	Public marking directory
BU4827FWE	ROHM ^*	VSOF-5	Public marking directory
BU4827G	ROHM ^*	SSOP-5	Public marking directory
DDZ9701	DIODES	SOD-123	Public marking directory
DDZ9701S	DIODES	SOD-323	Public marking directory
DDZ9701S	DIODES	—	Public marking directory
DDZ9702	DIODES	—	Public marking directory
DDZX9701	DIODES ^*	SOT-23	Public marking directory
DDZX9701TS	DIODES	SOT-363	Public marking directory
DDZX9701W	DIODES ^*	SOT-323	Public marking directory
MAX6315US27D2-T	MAX ^*	SOT-143	Public marking directory
R1112N481B	RICOH ^*	SOT-23-5	Public marking directory
AAT3510IGV-2.93-C-C	—	SOT-23-5	Public marking directory
P4SMAJ9.0	—	DO-214AC	Public marking directory
XC6127C46BNR	—	SSOT-24	Public marking directory
XC6127N46GNR	—	SSOT-24	Public marking directory
XC6224B221NR	—	SSOT-24	Public marking directory
Z2SMB-160	—	DO-214AA	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “H”

H0 H1 H2 H3 H4 H5 HA HC HD HE

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.