Identify an unknown SMD part: marking code “JR”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

19 candidates 11 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
2SA1384-R	TOS	SOT-89	Public marking directory
2SK208-R	TOS	SOT-23 16fa - 3a Tos	Public marking directory
2SK879-R	TOS	SOT-323 16fa - 3a Tos	Public marking directory
BAS20	PHI	SOT-23 16dc - 3a Gal	Public marking directory
BAS20WT	MCC	SOT-323	Public marking directory
BU4848F	ROHM *	SOP-4	Public marking directory
BU4848FWE	ROHM *	VSOF-5	Public marking directory
BU4848G	ROHM *	SSOP-5	Public marking directory
DZ23C4V3	DIODES *	SOD-23 16dg - 3a Lge	Public marking directory
MAX6315US30D4-T	MAX *	SOT-143	Public marking directory
MIC810RU	MICREL	SOT-23	Public marking directory
2SJ580	—	PCP	Public marking directory
AP1115AY-25	—	SOT-89	Public marking directory
AP1115BY-25	—	SOT-89	Public marking directory
BAS20H	—	SOD-323	Public marking directory
CD214A-T40A	—	DO-214AC	Public marking directory
ETC810RU	—	SOT-23	Public marking directory
P4SMAJ40A	—	DO-214AC	Public marking directory
RT9166-28CX	—	SOT-89	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “J”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.