PNDS / Marking codes / KM

Identify an unknown SMD part: marking code “KM”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 20 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SMB7.0A	CSC CENTRAL SEMIC.CORP.	—	Public marking directory
2SK2009	TOS	SOT-23	Public marking directory
BST80	PHI	SOT-89	Public marking directory
BU4928F	ROHM ^*	SOP-4	Public marking directory
BU4928FWE	ROHM ^*	VSOF-5	Public marking directory
BU4928G	ROHM ^*	SSOP-5	Public marking directory
DDZ5V1B	DIODES	SOD-123	Public marking directory
DDZ5V1BS	PAN	SOD-323	Public marking directory
DDZ5V1BS	DIODES	—	Public marking directory
DDZ5V6B	DIODES	—	Public marking directory
DDZX5V1B	DIODES	SOT-23	Public marking directory
DDZX5V1BTS	DIODES	SOT-363	Public marking directory
DDZX5V1BW	DIODES ^*	SOT-323	Public marking directory
DZ23C15	DIODES	SOD-23 16dg - 3a Lge	Public marking directory
FM811MUX	FSC ^*	SOT-143	Public marking directory
MIC811MU	MICREL	SOT-143	Public marking directory
P6SMB9.1A	ON	DO-214AA	Public marking directory
P6SMBJ7.0A	LITTLE ^*	DO-214AA	Public marking directory
R5426D102FA	RICOH ^*	—	Public marking directory
R5426N102FA	RICOH ^*	SOT-23-6	Public marking directory
2SB805-M	—	SOT-89	Public marking directory
2SK2171	—	SOT-89	Public marking directory
AAT3515IGV-4.38-C	—	SOT-23-5	Public marking directory
CD214B-T7.0A	—	DO-214AA	Public marking directory
ETC811MU	—	SOT-143	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “K”

K1 K2 K4 K5 KB KC KD KE KEC KN

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.