PNDS / Marking codes / LH

Identify an unknown SMD part: marking code “LH”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

19 candidates 8 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BF569	PHI	SOT-23	Public marking directory
BF569R	INFINEON	—	Public marking directory
BU4948F	ROHM ^*	SOP-4	Public marking directory
BU4948FWE	ROHM ^*	VSOF-5	Public marking directory
BU4948G	ROHM ^*	SSOP-5	Public marking directory
P6SMBJ14	LITTLE ^*	DO-214AA	Public marking directory
R1114Q371A	RICOH ^*	SOT-143R	Public marking directory
RN1112FS	TOS	—	Public marking directory
ELM7637HDB	—	SOT-23 16vdc VD7 3d Elm	Public marking directory
P6SMB22	—	DO-214AA	Public marking directory
PT7M6231NLC4	—	SC-70-4	Public marking directory
PT7M6231NLC4E	—	SC-70-4	Public marking directory
RP130Q181D5	—	SC-82AB	Public marking directory
RT9166-20CXL	—	SOT-89	Public marking directory
RT9168-32CBR	—	SOT-23-5	Public marking directory
TV06B140K	—	DO-214AA	Public marking directory
XC6120C46N	—	SSOT-24	Public marking directory
XC6127N28JNR	—	SSOT-24	Public marking directory
XC6223F261NR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “L”

LT7 LTDPN L1 L2 L3 L4 L5 L6 L7 L8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.