PNDS / Marking codes / M0

Identify an unknown SMD part: marking code “M0”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

18 candidates 7 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
CMOZ5L6	CSC CENTRAL SEMIC.CORP.	SOD-523	Public marking directory
R1121N301A	RICOH ^*	SOT-23-5	Public marking directory
R3111N402C	RICOH ^*	SOT-23	Public marking directory
R3111Q201A	RICOH ^*	SC-82AB	Public marking directory
R3116Q171A	RICOH ^*	SC-82AB	Public marking directory
RN5RG50AA	RICOH ^*	SOT-23-5	Public marking directory
RN5RY401A	RICOH ^*	SOT-23-5	Public marking directory
ELM7630LAB	—	SOT-23 16vdc VD7 3d Elm	Public marking directory
R1100D101C	—	—	Public marking directory
R1131D101B	—	—	Public marking directory
R1151N001C	—	SOT-23-6	Public marking directory
R3130N40BC	—	SOT-23	Public marking directory
RP104Q281B	—	SC-82AB	Public marking directory
RT9168A-15CBR	—	SOT-23-5	Public marking directory
XC61CN2002M	—	SOT-23	Public marking directory
XC61CN2002N	—	SOT-143R	Public marking directory
XC61CN2002P	—	SOT-89	Public marking directory
XC6GN2002HR	—	USP-3	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “M”

MEV MK7 M1 M2 M3 M4 M5 M6 M7 M8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.