Identify an unknown SMD part: marking code “MCO”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 19 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
2SC5084-O	TOS	SC-59	Public marking directory
2SC5085-O	TOS	SC-70	Public marking directory
2SC5088-O	TOS	USQ	Public marking directory
5BEP	MCC	DO-214AB	Public marking directory
5BEQ	MCC	DO-214AB	Public marking directory
5BER	MCC	DO-214AB	Public marking directory
5BES	MCC	DO-214AB	Public marking directory
5BET	MCC	DO-214AB	Public marking directory
5BEU	MCC	DO-214AB	Public marking directory
5BEV	MCC	DO-214AB	Public marking directory
5BEW	MCC	DO-214AB	Public marking directory
5BEX	MCC	DO-214AB	Public marking directory
5BFG	MCC	DO-214AB	Public marking directory
5BFK	MCC	DO-214AB	Public marking directory
5BFM	MCC	DO-214AB	Public marking directory
5BFP	MCC	DO-214AB	Public marking directory
5BFR	MCC	DO-214AB	Public marking directory
5BFT	MCC	DO-214AB	Public marking directory
5BFV	MCC	DO-214AB	Public marking directory
5BEZ	—	DO-214AB	Public marking directory
5BF	—	SMA5J13	Public marking directory
5BG	—	SMA5J13A	Public marking directory
5PEP	—	DO-214AB	Public marking directory
5PEQ	—	DO-214AB	Public marking directory
5PER	—	DO-214AB	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “M”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.