PNDS / Marking codes / MZ

Identify an unknown SMD part: marking code “MZ”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

16 candidates 7 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SMB51A	CSC CENTRAL SEMIC.CORP.	—	Public marking directory
BF1005	INFINEON	—	Public marking directory
P6SMB110A	ON	DO-214AA	Public marking directory
P6SMBJ51A	LITTLE	DO-214AA	Public marking directory
XC61119N39ANR-G	TOREX ^*	SSOT-24 26gh VD1 5c Tor	Public marking directory
XC6119N39ANR	TOREX ^*	SSOT-24	Public marking directory
ZVN4106F	ZETEX	SOT-23	Public marking directory
BF1005W	—	SOT-343R	Public marking directory
CD214B-T51A	—	DO-214AA	Public marking directory
PT7M6246CHC4	—	SC-70-4	Public marking directory
PT7M6246CHC4E	—	SC-70-4	Public marking directory
TCMM3Z18VB	—	SOD-323F	Public marking directory
TV06B510J	—	DO-214AA	Public marking directory
XC6109N29AN	—	SSOT-24	Public marking directory
XC6120N29N	—	SSOT-24	Public marking directory
XC6127N54KNR	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “M”

MEV MK7 M1 M2 M3 M4 M5 M6 M7 M8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.