PNDS / Marking codes / NB

Identify an unknown SMD part: marking code “NB”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

24 candidates 9 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BF1109WR	NXP	SOT-343R	Public marking directory
BF599	INFINEON	SOT-23	Public marking directory
CFY35-23	INFINEON	MW-4	Public marking directory
CHTA42LPT	CRY ^*	SOT-23 16ta - 3a Chm	Public marking directory
FMMTA55R	ZETEX	SOT-23	Public marking directory
MIC1810-10U	MICREL ^*	SOT-23	Public marking directory
MIC1810-10UY	MICREL ^*	SOT-23 16vda VD7 3a Mcr	Public marking directory
RN1443B	TOS	SOT-346	Public marking directory
TC1014-2.6VRX	MIC ^*	SOT-23-5	Public marking directory
2SK1483	—	SOT-89	Public marking directory
CHT42PT	—	SOT-23 16ta - 3a Chm	Public marking directory
ETC1810-10U	—	SOT-23	Public marking directory
KDZ6.2B	—	—	Public marking directory
KRC102S	—	SOT-23	Public marking directory
KRC402	—	SOT-323	Public marking directory
KRC402E	—	SOT-490	Public marking directory
KRC402V	—	—	Public marking directory
PT7M6247CLC4	—	SC-70-4	Public marking directory
PT7M6247CLC4E	—	SC-70-4	Public marking directory
R5323N010B	—	SOT-23-6	Public marking directory
RP130Q311D	—	SC-82AB	Public marking directory
XC6120N41N	—	SSOT-24	Public marking directory
XC6127C18DNR	—	SSOT-24	Public marking directory
XC6223H211NR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “N”

N N0 N1 N2 N3 N4 N5 N6 N7 N8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.