Identify an unknown SMD part: marking code “ND”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

21 candidates 4 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BF841	INFINEON	SOT-23	Public marking directory
MIC1815-10U	MICREL *	SOT-23 16vda VD7 3a Mcr	Public marking directory
MIC1815-10UY	MICREL *	SOT-23 16vda VD7 3a Mcr	Public marking directory
P6SMBJ54	LITTLE *	DO-214AA	Public marking directory
2SC2412KPT-Q	—	SOT-23 16ta - 3a Chm	Public marking directory
2SC5539	—	—	Public marking directory
2SD1306-D	—	SC-59A 16ta - 3a Ren	Public marking directory
2SK1583	—	SOT-89	Public marking directory
KRC104S	—	SOT-23	Public marking directory
KRC404	—	SOT-323	Public marking directory
KRC404E	—	SOT-490	Public marking directory
KRC404V	—	—	Public marking directory
P6SMB120	—	120V, 3,5A, 600W(1ms)	Public marking directory
PT7M6247NLC4	—	SC-70-4	Public marking directory
PT7M6247NLC4E	—	SC-70-4	Public marking directory
R5323N014B	—	SOT-23-6	Public marking directory
RP130Q331D	—	SC-82AB	Public marking directory
TV06B540K	—	DO-214AA	Public marking directory
XC6120N43N	—	SSOT-24	Public marking directory
XC6127C22DNR	—	SSOT-24	Public marking directory
XC6223H231NR-G	—	SSOT-24	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “N”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.