PNDS / Marking codes / NN

Identify an unknown SMD part: marking code “NN”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

17 candidates 5 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BAR65-02L	INFINEON	—	Public marking directory
HSMS-282N	AGILENT	SOT-363	Public marking directory
P6SMBJ70	LITTLE ^*	DO-214AA	Public marking directory
XC61119N40ANR-G	TOREX ^*	SSOT-24 26gh VD1 5c Tor	Public marking directory
XC6119N40ANR	TOREX ^*	SSOT-24	Public marking directory
ASM811MEUSF	—	SOT-143	Public marking directory
KRC112S	—	SOT-23	Public marking directory
KRC412	—	SOT-323	Public marking directory
KRC412E	—	SOT-490	Public marking directory
KRC412V	—	—	Public marking directory
P6SMB170	—	DO-214AA	Public marking directory
R1122N421A	—	SOT-23-5	Public marking directory
R5323N021B	—	SOT-23-6	Public marking directory
TV06B700K	—	DO-214AA	Public marking directory
XC6109N30AN	—	SSOT-24	Public marking directory
XC6120N50N	—	SSOT-24	Public marking directory
XC6127C36DNR	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “N”

N N0 N1 N2 N3 N4 N5 N6 N7 N8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.