PNDS / Marking codes / P20

Identify an unknown SMD part: marking code “P20”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

22 candidates 22 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
DDA144EK	DIODES	SOT-26	Public marking directory
DDA144EK	DIODES	—	Public marking directory
DDA144EU	DIODES	SOT-363	Public marking directory
DDA144EU	DIODES	—	Public marking directory
DDB113EK	DIODES	—	Public marking directory
DDTA124ECA	DIODES	SOT-23	Public marking directory
DDTA124EE	DIODES	SOT-523	Public marking directory
DDTA124EKA	DIODES	SC-59	Public marking directory
DDTA124EUA	DIODES	SOT-323	Public marking directory
DDTA144ECA	DIODES	SOT-23	Public marking directory
DDTA144EE	DIODES	SOT-523	Public marking directory
DDTA144EE	DIODES	—	Public marking directory
DDTA144EKA	DIODES	SC-59	Public marking directory
DDTA144EKA	DIODES	—	Public marking directory
DDTA144ELP	DIODES	—	Public marking directory
DDTA144EUA	DIODES	SOT-323	Public marking directory
PDTC144WT	NXP	SOT-23	Public marking directory
PDTC144WT	PHI	SOT23	Public marking directory
PDTC144WU	PHI	SOT-323 16ta - 3a PhH	Public marking directory
SST270	SILICONIX-VISHAY	SOT-23 16fj - 3a Cal	Public marking directory
TK11220AM	TOKO ^*	SOT-23L-6	Public marking directory
TK11220AU	TOKO ^*	SOT-89-5	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “P”

PK7 PR7 P0 P1 P2 P3 P4 P5 P6 P7

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.