PNDS / Marking codes / PJT

Identify an unknown SMD part: marking code “PJT”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 22 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
100C	MCC	DO-214AB	Public marking directory
110C	MCC	DO-214AB	Public marking directory
130C	MCC	DO-214AB	Public marking directory
13B	Switchcraft	DO-214	Public marking directory
150C	MCC	DO-214AB	Public marking directory
160C	NPC	DO-214AB	Public marking directory
170C	MCC	DO-214AB	Public marking directory
180C	MCC	DO-214AB	Public marking directory
200C	MCC	DO-214AB	Public marking directory
220C	MCC	DO-214AB	Public marking directory
320C	TI ^*	DO-214AA	Public marking directory
357B	VISHAY SPECTROL ^*	DO-214AB	Public marking directory
39C	MCC	DO-214AB	Public marking directory
43C	MCC	DO-214AB	Public marking directory
47C	MCC	DO-214AB	Public marking directory
51C	MOT	DO-214AB	Public marking directory
56C	MCC	DO-214AB	Public marking directory
62C	MCC	DO-214AB	Public marking directory
68C	MCC	DO-214AB	Public marking directory
75C	MCC	DO-214AB	Public marking directory
82C	MCC	DO-214AB	Public marking directory
91C	MCC	DO-214AB	Public marking directory
058B	—	DO-214AA	Public marking directory
058C	—	DO-214AA	Public marking directory
065B	—	DO-214AA	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “P”

PK7 PR7 P0 P1 P2 P3 P4 P5 P6 P7

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.