PNDS / Marking codes / RE

Identify an unknown SMD part: marking code “RE”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

23 candidates 13 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SMA12A	ON	—	Public marking directory
2SC3357	NEC	SOT89	Public marking directory
2SC3357-E	NEC ^*	SOT-89	Public marking directory
2SC5336-E	TOS ^*	SOT-89	Public marking directory
BD5344FVE	ROHM ^*	VSOF-5	Public marking directory
BD5344G	ROHM ^*	SSOP-5	Public marking directory
BFP280W	INFINEON	SOT-343	Public marking directory
BZX84C3V3TS	DIODES	—	Public marking directory
NE85634-E	NEC ^*	SOT-89	Public marking directory
PDZ8.2B	NXP	SOD-323	Public marking directory
RN2325A	TOS	SOT-323	Public marking directory
RN2425	TOS	SC-59	Public marking directory
SM4T18A	ST ^*	SOD-6	Public marking directory
2SA1514K-E	—	SOT-346	Public marking directory
2SA1579-E	—	SOT-323	Public marking directory
2SC2412WPT-Q	—	SOT-323 16ta - 3a Chm	Public marking directory
BZX84-C2V4T	—	SOT-523	Public marking directory
BZX84-C3V3T	—	SOT-523	Public marking directory
CD214A-T54A	—	DO-214AC	Public marking directory
P4SMA8.2C	—	DO-214AC	Public marking directory
P4SMAJ54A	—	DO-214AC	Public marking directory
TV04A540J	—	DO-214AC	Public marking directory
XC6127C24FNR	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “R”

R1 R2 R3 R4 R5 R6 R7 RHM RB R8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.