PNDS / Marking codes / V7

Identify an unknown SMD part: marking code “V7”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

12 candidates 9 with manufacturer source-traceable

Candidate part numbers

Part numberManufacturerPackageMapping source
1SV322 TOS SOD-123 Public marking directory
1SV323 TOS SOD-323 Public marking directory
BD45252G ROHM * SSOP-5 Public marking directory
DZ23-C4V7 DIODES * SOT-23 Public marking directory
MC74VHC1G07DF ON * SC-70-5 Public marking directory
MC74VHC1G07DT ON * SOT-23-5 Public marking directory
R1121N171B RICOH * SOT-23-5 Public marking directory
R3111Q271C RICOH * SC-82AB Public marking directory
TC74A7-3.3VCT TOS * SOT-23-5 Public marking directory
BFG67W/XR — SOT-343R Public marking directory
ELM7627LBB — SOT-23 16vdc VD7 3d Elm Public marking directory
XC6223F17BNR-G — SSOT-24 Public marking directory

How we narrow this down

  1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
  2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
  3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
  4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
  5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Other codes starting with “V”

V1V2VSV3V4V5VKVLVPVR
Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. * Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.