Identify an unknown SMD part: marking code “WTR”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 1 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
p2T	PHI	SOT-89	Public marking directory
1DR	—	SOT-323	Public marking directory
22A	—	SOT-89	Public marking directory
2T1L	—	SOT-23	Public marking directory
649AC	—	SOT-89	Public marking directory
669AC	—	SOT-89	Public marking directory
66A	—	SOT-89	Public marking directory
6V2Z	—	SOD-123F	Public marking directory
A42A	—	SOT-89	Public marking directory
A42B2	—	SOT-89	Public marking directory
A42C	—	SOT-89	Public marking directory
B772O	—	SOT-89	Public marking directory
B772R	—	SOT-89	Public marking directory
B772Y	—	SOT-89	Public marking directory
B7A	—	SOT-89	Public marking directory
D882O	—	SOT-89	Public marking directory
D882R	—	SOT-89	Public marking directory
D882Y	—	SOT-89	Public marking directory
G1F	—	SOT-23	Public marking directory
G3K	—	—	Public marking directory
J3L	—	SOT-23	Public marking directory
J6L	—	SOT-23	Public marking directory
M6K	—	SC-70	Public marking directory
M6P	—	SOT-23	Public marking directory
R25	—	SOT-323	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “W”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.