PNDS / Marking codes / XK

Identify an unknown SMD part: marking code “XK”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 23 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
12A02S	ON	SMCP 16ta - 3a San	Public marking directory
12A02SS	ON	SSFP 18ta - 3a San	Public marking directory
BD46232G	ROHM ^*	SSOP-5	Public marking directory
BZX284-B20	PHI	SOD-110	Public marking directory
BZX284-B20	PHI	SOD110	Public marking directory
CMDZ5239B	CSC CENTRAL SEMIC.CORP. ^*	SOD-323	Public marking directory
RN1110	TOS	SOT-416	Public marking directory
RN1110F	TOS ^*	SOT-490	Public marking directory
RN1110FT	TOS	—	Public marking directory
RN1110FV	TOS	SOT-723	Public marking directory
RN1310	TOS	SOT-323	Public marking directory
RN1410	TOS	SOT-346	Public marking directory
RN1510	TOS	—	Public marking directory
RN1610	TOS	—	Public marking directory
RN1710	TOS	SOT-353	Public marking directory
RN1710JE	TOS	SOT-553	Public marking directory
RN1910	TOS	—	Public marking directory
RN1910FE	TOS	SOT-563	Public marking directory
RN2110F	TOS	SOT-490	Public marking directory
RN2110FS	TOS	—	Public marking directory
RN2110FV	TOS	SOT-723	Public marking directory
RN5RK391B	RICOH ^*	SOT-23-5	Public marking directory
SM4T150CA	ST ^*	SOD-6	Public marking directory
2SD1614-K	—	SOT-89	Public marking directory
CD214A-T130CA	—	DO-214AC	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “X”

XA XB XC XD XE XF XH XM XP XQ

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.