PNDS / Marking codes / Z9

Identify an unknown SMD part: marking code “Z9”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

21 candidates 13 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
2SJ465	TOS	SOT-89	Public marking directory
BZT52C11	MCC	SOD-123	Public marking directory
BZV49-C10	PHI	SOT-89	Public marking directory
BZX84-A10	PHI	SOT-23	Public marking directory
BZX84-B10	NXP	SOT-23	Public marking directory
BZX84-C10	PHI	SOT-23	Public marking directory
BZX84C39	PHI	SOT-23 16dc - 3a Lge	Public marking directory
CD-0603-Z4V7	BOURNS ^*	0603	Public marking directory
CD-1005-Z4V7	CDE ^*	—	Public marking directory
MM5Z10V	FSC	SOD-523	Public marking directory
PDZ5.6B	NXP	SOD-323	Public marking directory
PDZ5.6B	PHI	SC-76/SOD323	Public marking directory
SST309	SILICONIX-VISHAY	SOT-23	Public marking directory
BZT52-C10T	—	SOD-523	Public marking directory
BZX84-C10-V	—	SOT-23	Public marking directory
BZX88-C10	—	SOT-323	Public marking directory
ELM7649LCB	—	SOT-23 16vdc VD7 3d Elm	Public marking directory
R1210N492D	—	SOT-23-5	Public marking directory
TCMM3Z5V6C	—	SOD-323F	Public marking directory
XC6224A29BNR	—	SSOT-24	Public marking directory
ZD5259BSG	—	SOD-323-S	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “Z”

Z1 Z2 Z3 Z4 Z6 Z8 ZC ZQ ZR ZS

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.