PNDS / Marking codes / 39

Identify an unknown SMD part: marking code “39”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 10 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
CMZ39	TOS	—	Public marking directory
MAZ8390	PANASONIC ^*	SC-76	Public marking directory
MAZS390	PANASONIC ^*	SC-79	Public marking directory
MAZS3900L	PANASONIC ^*	SC-79	Public marking directory
P6SMBJ39	LITTLE ^*	DO-214AA	Public marking directory
PA10	CIRRUS	—	Public marking directory
PA12	CIRRUS	—	Public marking directory
R3111Q391B	RICOH ^*	SC-82AB	Public marking directory
RN5RF39AA	RICOH ^*	SOT-23-5	Public marking directory
RN5RZ39AA	RICOH ^*	SOT-23-5	Public marking directory
2SA1037M1PT-R	—	FBPT-723 17ta - 9a Chm	Public marking directory
2SA1037MPT-R	—	SOT-723 18ta - 3a Chm	Public marking directory
ELM7619HBB	—	SOT-23 16vdc VD7 3d Elm	Public marking directory
ELM9839BB	—	SOT-23 16cg VR1 3d Elm	Public marking directory
Gali-39	—	SOT-89	Public marking directory
HMSZ5239B	—	SOD-323	Public marking directory
HZC3.9	—	SOD-523	Public marking directory
KDZ3.9EV	—	SOD-523	Public marking directory
KDZ3.9V	—	SOD-323	Public marking directory
LEE-39	—	—	Public marking directory
MAZY390	—	NMiniP2	Public marking directory
PA1	—	—	Public marking directory
PA14	—	—	Public marking directory
PA17	—	—	Public marking directory
PA2	—	—	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “3”

30 33 36 37 3A 3B 3E 3D 32 35

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.