PNDS / Marking codes / 3D

Identify an unknown SMD part: marking code “3D”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

24 candidates 13 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BC856	NXP	SOT-23	Public marking directory
BC856S	NXP	—	Public marking directory
MMBTA55	MCC	SOT-23	Public marking directory
MMBTH81	FS	SOT-23	Public marking directory
MMBTH81L	MOT	SOT23	Public marking directory
R3111N331A	RICOH ^*	SOT-23-5	Public marking directory
RB715F	MCC	SOT-323	Public marking directory
RB715W	MCC	SOT-523	Public marking directory
RB717F	MCC	SOT-323	Public marking directory
RH5RL43AA	RICOH ^*	SOT-89	Public marking directory
RN5RL43AA	RICOH ^*	SOT-23-5	Public marking directory
RN5VD33CA	RICOH ^*	SOT-23-5	Public marking directory
RQ5RW33AA	RICOH ^*	SOT-143R	Public marking directory
CH715FPT	—	SOT-323 16df - 3a Chm	Public marking directory
MM3Z56V	—	SOD-323	Public marking directory
R1161D331A	—	—	Public marking directory
R3131N43EC	—	SOT-23	Public marking directory
R3132Q43EA	—	SOT-143	Public marking directory
VR1	—	—	Public marking directory
WOSD03	—	SOD-323	Public marking directory
XC6127N21DNR	—	SSOT-24	Public marking directory
XC6213B33ANR	—	SSOT-24	Public marking directory
XC6217D142NR	—	SSOT-24	Public marking directory
XC6223A301NR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “3”

30 33 36 37 39 3A 3B 3E 32 35

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.