PNDS / Marking codes / CF

Identify an unknown SMD part: marking code “CF”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 17 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BCP69-16	NXP	SOT-223	Public marking directory
BCX69-10	INFINEON	SOT-89	Public marking directory
BH29FB1WG	ROHM ^*	SSOP-5	Public marking directory
BH29FB1WHFV	ROHM ^*	—	Public marking directory
BH29MA3WHFV	ROHM ^*	—	Public marking directory
BH29RB1WGUT	ROHM ^*	BGA-4	Public marking directory
BSS79C	INFINEON	SOT-23	Public marking directory
BZX884-B62	NXP	SOD-882	Public marking directory
MAX6314US33D1-T	MAX ^*	SOT-143	Public marking directory
MAZD056	PANASONIC ^*	—	Public marking directory
MMSZ4697	FSC	SOD-123	Public marking directory
P6SMBJ28C	LITTLE ^*	DO-214AA	Public marking directory
R3112Q251A	RICOH ^*	SC-82AB	Public marking directory
RN1911AFS	TOS ^*	—	Public marking directory
RN5RT45AA	RICOH ^*	SOT-23-5	Public marking directory
UNR31A2	PANASONIC ^*	—	Public marking directory
ZMV834B	ZETEX	SOD-323	Public marking directory
2SA1366-F	—	SOT-23	Public marking directory
2SC3650	—	PCP	Public marking directory
2SK2552B-F	—	SOT-23	Public marking directory
74AHCT1G14	—	SOT-353	Public marking directory
AP130-20TW	—	—	Public marking directory
AP130-20W	—	SOT-23	Public marking directory
AP130-20Y	—	SOT-89	Public marking directory
CPH3206	—	—	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “C”

C0 C1 C2 C3 C4 C5 C6 C7 C8 C9

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.