PNDS / Marking codes / CM

Identify an unknown SMD part: marking code “CM”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 8 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BH1JLB1WHFV	ROHM ^*	—	Public marking directory
BSS82C	INFINEON	SOT-23	Public marking directory
MAX6314US26D1-T	MAX ^*	SOT-143	Public marking directory
MMBZ4685	VISHAY ^*	SOT-23	Public marking directory
P6SMBJ33AC	LITTLE ^*	DO-214AA	Public marking directory
R1112N411A	RICOH ^*	SOT-23-5	Public marking directory
R3112Q211C	RICOH ^*	SC-82AB	Public marking directory
SMF33A	LITTELFUSE	DO-219AB	Public marking directory
2SD999-M	—	SOT-89	Public marking directory
50C02MH	—	MCPH3 18ta - 3a San	Public marking directory
74AHCT1G125	—	SOT-353	Public marking directory
AP130-27TW	—	—	Public marking directory
AP130-27W	—	SOT-23	Public marking directory
AP130-27Y	—	SOT-89	Public marking directory
CD214B-T33CA	—	DO-214AA	Public marking directory
CPH3212	—	—	Public marking directory
FP6812-26CC4P	—	SC-70-4	Public marking directory
GS6332UR23D1	—	SOT-23	Public marking directory
MMSZ4685	—	SOD-123	Public marking directory
MMSZ4701	—	SOD-123	Public marking directory
P4SMA62A	—	DO-214AC	Public marking directory
P4SMAJ33A	—	DO-214AC	Public marking directory
R5220D211A	—	—	Public marking directory
SiP6332R23D1	—	SOT-23	Public marking directory
TV04A330J	—	DO-214AC	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “C”

C0 C1 C2 C3 C4 C5 C6 C7 C8 C9

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.