Identify an unknown SMD part: marking code “CTC”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 2 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
18C	MCC	SOT-23	Public marking directory
320A	TI *	DO-214AA	Public marking directory
01C100PH	—	DO-214AC	Public marking directory
03C10	—	DO-214AC	Public marking directory
058A	—	DO-214AA	Public marking directory
090A	—	DO-214AA	Public marking directory
18B	—	SOT-23	Public marking directory
18D	—	SOT-23	Public marking directory
18F	—	SOT-23	Public marking directory
190A	—	DO-214AA	Public marking directory
1AD	—	SMB10J5.0	Public marking directory
1CD	—	SMB10J26	Public marking directory
1E1	—	DO-216AA	Public marking directory
23A	—	DO-214AC	Public marking directory
250A	—	DO-214AB	Public marking directory
28B	—	DO-214AA	Public marking directory
29B	—	SOD-323	Public marking directory
348B	—	DO-214AB	Public marking directory
350A	—	DO-214AB	Public marking directory
370B	—	DO-214AB	Public marking directory
380B	—	120V±10%, 5W	Public marking directory
440A	—	DO-214AB	Public marking directory
480A	—	DO-214AB	Public marking directory
81B	—	SOT-23	Public marking directory
81C	—	SOT-23	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “C”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.