PNDS / Marking codes / EL

Identify an unknown SMD part: marking code “EL”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 10 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
2SD1001-L	NEC ^*	SOT-89	Public marking directory
BD4850FVE	ROHM ^*	VSOF-5	Public marking directory
BD4850G	ROHM ^*	SSOP-5	Public marking directory
MAX6314US34D3-T	MAX ^*	SOT-143	Public marking directory
P6SMBJ150C	LITTLE ^*	DO-214AA	Public marking directory
R3112Q401C	RICOH ^*	SC-82AB	Public marking directory
TB064H	DIODES	—	Public marking directory
UNR221M	PANASONIC ^*	SC-59	Public marking directory
UNR521M	PANASONIC ^*	SOT-523	Public marking directory
UNR921MJ	PANASONIC ^*	SC-89	Public marking directory
2SA1344	—	SOT-23	Public marking directory
2SA1678	—	SOT-323	Public marking directory
2SB1028-L	—	SOT-89	Public marking directory
AP1703FTW	—	—	Public marking directory
AP1703FW	—	SOT-23-3L	Public marking directory
RT9167-35CB	—	SOT-23-5	Public marking directory
SM6T24	—	DO-214AA	Public marking directory
SiP809CREUDT	—	SOT-23	Public marking directory
TS809RCXF	—	SOT-23	Public marking directory
TV06B151KB	—	DO-214AA	Public marking directory
UN221M	—	SC-59	Public marking directory
UN521M	—	SOT-523	Public marking directory
XC6127C31KNR	—	SSOT-24	Public marking directory
XC6127N32ENR	—	SSOT-24	Public marking directory
XC6223D281NR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “E”

EK EV E0 E1 E2 E3 E4 E5 E6 E8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.