PNDS / Marking codes / EW

Identify an unknown SMD part: marking code “EW”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

16 candidates 9 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
BCW65CR	INFINEON	SOT23R	Public marking directory
BD4860FVE	ROHM ^*	VSOF-5	Public marking directory
BD4860G	ROHM ^*	SSOP-5	Public marking directory
MAX6314US25D3-T	MAX ^*	SOT-143	Public marking directory
P6SMBJ200C	LITTLE ^*	DO-214AA	Public marking directory
SM6T39	ST	DO-214AA	Public marking directory
UNR211N	PANASONIC ^*	SC-59	Public marking directory
UNR511N	PANASONIC ^*	SOT-523	Public marking directory
UNR911NJ	PANASONIC ^*	SC-89	Public marking directory
AAT3511IGV-2.63-C-C	—	SOT-23-5	Public marking directory
AP1625W	—	SOT-23-5L	Public marking directory
RT9167-45CB	—	SOT-23-5	Public marking directory
SiP810C27EUADT	—	SOT-23	Public marking directory
UN211N	—	SC-59	Public marking directory
UN511N	—	SOT-523	Public marking directory
Z1SMA-33	—	DO-214AC	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “E”

EK EV E0 E1 E2 E3 E4 E5 E6 E8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.