PNDS / Marking codes / EXC

Identify an unknown SMD part: marking code “EXC”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 4 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
5913B	DIALIGHT ^*	SMB5913B	Public marking directory
5913B3	DIALIGHT ^*	SMB5913B3	Public marking directory
5922B	DIALIGHT ^*	SMA5922B	Public marking directory
5922B3	DIALIGHT ^*	SMB5922B3	Public marking directory
4728A	—	DO-214AC	Public marking directory
4729A	—	DO-214AC	Public marking directory
4730A	—	DO-214AC	Public marking directory
4731A	—	DO-214AC	Public marking directory
4732A	—	DO-214AC	Public marking directory
4733A	—	DO-214AC	Public marking directory
4734A	—	DO-214AC	Public marking directory
4735A	—	DO-214AC	Public marking directory
4736A	—	DO-214AC	Public marking directory
4737A	—	DO-214AC	Public marking directory
4738A	—	DO-214AC	Public marking directory
4739A	—	DO-214AC	Public marking directory
4740A	—	DO-214AC	Public marking directory
4741A	—	DO-214AC	Public marking directory
4742A	—	DO-214AC	Public marking directory
4743A	—	DO-214AC	Public marking directory
4744A	—	DO-214AC	Public marking directory
4745A	—	DO-214AC	Public marking directory
4746A	—	DO-214AC	Public marking directory
4747A	—	DO-214AC	Public marking directory
4748A	—	DO-214AC	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “E”

EK EV E0 E1 E2 E3 E4 E5 E6 E8

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.