PNDS / Marking codes / S6

Identify an unknown SMD part: marking code “S6”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 13 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1PS76SB62	PHI	SOD-323	Public marking directory
1PS89SS06	PHI	SOT-490	Public marking directory
1PS89SS06	PHI	SC-89/SOT490	Public marking directory
BAT15-099R	INFINEON	—	Public marking directory
BF510	PHI	—	Public marking directory
R1121N361B	RICOH ^*	SOT-23-5	Public marking directory
R3116Q231C	RICOH ^*	SC-82AB	Public marking directory
SD103AW	DIODES	SOD-123	Public marking directory
SD103AWS	MICROCOMMERCIALCOMPONENTS	SOD-323	Public marking directory
SD103CW	DIODES	SOD-123	Public marking directory
SD103CWS	MCC	SOD-323	Public marking directory
SD107WS	MCC	SOD-323	Public marking directory
SST176	SILICONIX-VISHAY	SOT-23	Public marking directory
2SC3361-6	—	SOT-23	Public marking directory
D3FS6	—	DO-214	Public marking directory
ELM7636HCB	—	SOT-23 16vdc VD7 3d Elm	Public marking directory
ELM9746CAB	—	SOT-89	Public marking directory
FS2K	—	DO-214AA	Public marking directory
KTA2014-6	—	SOT-323	Public marking directory
KTA2014E-6	—	ESM 18ta - 3f Kec	Public marking directory
KTA2014F-6	—	TFSM 19ta - 3f Kec	Public marking directory
KTA2014V-6	—	VSM 18ta - 3f Kec	Public marking directory
R1131D161D	—	—	Public marking directory
R1163D161B	—	—	Public marking directory
R1225N332D	—	SOT-23-6W 33so	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “S”

S14 S2 S4 SAM SAY SEI SIL SIX SK S5

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.