PNDS / Marking codes / SIL

Identify an unknown SMD part: marking code “SIL”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 6 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
04180PH	IBM ^*	DO-214AC	Public marking directory
0433PH	LITTELFUSE ^*	DO-214AC	Public marking directory
0436PH	IBM ^*	DO-214AC	Public marking directory
0451PH	LITTELFUSE ^*	DO-214AC	Public marking directory
0456PH	LITTELFUSE ^*	DO-214AC	Public marking directory
0468PH	LITTELFUSE ^*	DO-214AC	Public marking directory
03C100	—	DO-214AC	Public marking directory
03C100PH	—	DO-214AC	Public marking directory
03C110	—	DO-214AC	Public marking directory
03C110PH	—	DO-214AC	Public marking directory
03C120	—	DO-214AC	Public marking directory
03C120PH	—	DO-214AC	Public marking directory
03C130	—	DO-214AC	Public marking directory
03C130PH	—	DO-214AC	Public marking directory
03C150	—	DO-214AC	Public marking directory
03C150PH	—	DO-214AC	Public marking directory
03C160	—	DO-214AC	Public marking directory
03C160PH	—	DO-214AC	Public marking directory
03C180	—	DO-214AC	Public marking directory
03C180PH	—	DO-214AC	Public marking directory
03C200	—	DO-214AC	Public marking directory
03C200PH	—	DO-214AC	Public marking directory
03C220	—	DO-214AC	Public marking directory
03C220PH	—	DO-214AC	Public marking directory
03C240	—	DO-214AC	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “S”

S14 S2 S4 S6 SAM SAY SEI SIX SK S5

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.