PNDS / Marking codes / SE

Identify an unknown SMD part: marking code “SE”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

20 candidates 12 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SMA26A	ON	—	Public marking directory
2SC4703	NEC	—	Public marking directory
2SC5338-E	TOS ^*	SOT-89	Public marking directory
B0530W	DIODES	SOD-123	Public marking directory
B0530WS	DIODES	SOD-323	Public marking directory
B0530WS	DIODES	—	Public marking directory
B0540W	DIODES	—	Public marking directory
SB05W05P	SANYO	PCP	Public marking directory
SMBT2907A	SIEMENS	SOT-23 16ta - 3a Sie	Public marking directory
TC75S54F	TOS ^*	SOT-25	Public marking directory
TC75S54FE	TOS ^*	—	Public marking directory
TC75S54FU	TOS	SOT-353	Public marking directory
2SC4703-E	—	SOT-89	Public marking directory
2SC5210-E	—	SOT-89	Public marking directory
CD214A-T110A	—	DO-214AC	Public marking directory
P4SMAJ110A	—	DO-214AC	Public marking directory
R1225N332K	—	SOT-23-6W 33so	Public marking directory
TV04A111J	—	DO-214AC	Public marking directory
XC6127C24GNR	—	SSOT-24	Public marking directory
XC6223C24BNR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “S”

S14 S2 S4 S6 SAM SAY SEI SIL SIX SK

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.