Identify an unknown SMD part: marking code “SY”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

16 candidates 6 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
2SA1162-Y	MCC	SOT-23	Public marking directory
2SA1201-O	MCC	SOT-89	Public marking directory
2SA1586-Y	TOS	SC-70	Public marking directory
2SA1618-Y	TOS	SOT-143	Public marking directory
2SA1873-Y	TOS	SOT-23-5	Public marking directory
2SC3900	PANASONIC *	CP 16ta - 3a San	Public marking directory
2SA1832FT-Y	—	—	Public marking directory
KTA2014-Y	—	SOT-323	Public marking directory
KTA2014E-Y	—	ESM 18ta - 3f Kec	Public marking directory
KTA2014F-Y	—	TFSM 19ta - 3f Kec	Public marking directory
KTA2014V-Y	—	VSM 18ta - 3f Kec	Public marking directory
P4SMA75C	—	DO-214AC	Public marking directory
P4SMAJ210	—	DO-214AC	Public marking directory
PT7M6314US25D3	—	SOT-143	Public marking directory
XC6127C52GNR	—	SSOT-24	Public marking directory
XC6223C38BNR-G	—	SSOT-24	Public marking directory

How we narrow this down

1. Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
2. Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
3. Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
4. Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
5. Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

• Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
• Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
• Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “S”

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.