PNDS / Marking codes / T3

Identify an unknown SMD part: marking code “T3”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

25 candidates 24 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SV186	TOS ^*	SOD-123	Public marking directory
1SV245	TOS	SOD-123	Public marking directory
1SV261	SANYO ^*	SOD-323	Public marking directory
BAS21T	DIODES	SOT-416	Public marking directory
BAS21W	DIODES	—	Public marking directory
BAS21WT	MCC	SOT-323	Public marking directory
BAV19W	DIODES	SOD-123	Public marking directory
BAV19WS	MCC	SOD-323	Public marking directory
BAV20W	MCC	SOD-123	Public marking directory
BAV20WS	DIODES	SOD-323	Public marking directory
BAV20WS	DIODES	—	Public marking directory
BAV21W	DIODES	SOD-123	Public marking directory
BAV21W	DIODES	—	Public marking directory
BAV21WS	DIODES	SOD-323	Public marking directory
BAV21WS	DIODES	—	Public marking directory
BAV23A	DIODES	—	Public marking directory
BAV23A	MCC	SOT-23	Public marking directory
BD45455G	ROHM ^*	SSOP-5	Public marking directory
BSS63	PHI	SOT23	Public marking directory
HSMS-2863	HP	SOT-23	Public marking directory
HSMS-286E	HP	SOT323	Public marking directory
MMSZ3V0	ON ^*	SOD-123	Public marking directory
R1121N431B	RICOH ^*	SOT-23-5	Public marking directory
R3116Q301C	RICOH ^*	SC-82AB	Public marking directory
2SK1065-3	—	—	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “T”

T2 T4 T5 TOK TT T8 TK TS T6 TE

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.