PNDS / Marking codes / TT

Identify an unknown SMD part: marking code “TT”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

22 candidates 8 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SV302	TOS	SOD-123	Public marking directory
1SV303	TOS	SOD-523	Public marking directory
2SC3929A-T	PANASONIC ^*	SOT-323	Public marking directory
2SC5437-FB	NEC ^*	SOT-523	Public marking directory
2SC5437FB	NEC	SC59	Public marking directory
BD45471G	ROHM ^*	SSOP-5	Public marking directory
P6SMB82CA	ON	DO-214AA	Public marking directory
SM4T200A	ST	SOD-6	Public marking directory
2SA1036KPT-Q	—	SOT-23 16ta - 3a Chm	Public marking directory
2SA1530A-T	—	SOT-23	Public marking directory
2SA1603-T	—	SC-70	Public marking directory
2SA1989-T	—	SC-75A	Public marking directory
2SC2406-T	—	SOT-23	Public marking directory
ASM162MEUS	—	SOT-143	Public marking directory
BAT54TAPT	—	SOT-416 16df - 3a Chm	Public marking directory
CD214A-T8.5CA	—	DO-214AC	Public marking directory
P4SMAJ8.5AC	—	DO-214AC	Public marking directory
PT7M6314US30D4	—	SOT-143	Public marking directory
R1122N471B	—	SOT-23-5	Public marking directory
XC6127C44HNR	—	SSOT-24	Public marking directory
XC6215B252NR	—	SSOT-24	Public marking directory
XC6223D34BNR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “T”

T2 T3 T4 T5 TOK T8 TK TS T6 TE

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.