PNDS / Marking codes / T6

Identify an unknown SMD part: marking code “T6”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

20 candidates 11 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1N4148WS	DIODES	—	Public marking directory
1N4148WT	DIODES	—	Public marking directory
1SV217	TOS	SOD-123	Public marking directory
BAV16W	DIODES	SOD-123	Public marking directory
BAV16WS	DIODES	SOD-323	Public marking directory
BD45425G	ROHM ^*	SSOP-5	Public marking directory
BSS63	PHI	SOT-23	Public marking directory
BSS63R	PHI	SOT23R	Public marking directory
BZX384-C3V3	PHI	SOD-323	Public marking directory
R1121N461B	RICOH ^*	SOT-23-5	Public marking directory
R3116Q331C	RICOH ^*	SC-82AB	Public marking directory
1SV211	—	SOD-123	Public marking directory
ELM7646HCB	—	SOT-23 16vdc VD7 3d Elm	Public marking directory
FS2K	—	DO-214AB	Public marking directory
FS3K	—	DO-214AB	Public marking directory
HVM17	—	SOT-23	Public marking directory
MM3Z3V6S	—	SOD-323	Public marking directory
R1131D261D	—	—	Public marking directory
R1163D261B	—	—	Public marking directory
XC6223D16BNR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “T”

T2 T3 T4 T5 TOK TT T8 TK TS TE

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.