PNDS / Marking codes / TK

Identify an unknown SMD part: marking code “TK”

Packages rarely print the full part number. The marking below is shared by several part numbers — use the package, pin count and the manufacturer family together to narrow it down, then confirm against the datasheet.

21 candidates 9 with manufacturer source-traceable

Candidate part numbers

Part number	Manufacturer	Package	Mapping source
1SMA60A	ON ^*	—	Public marking directory
1SV287	TOS	SOD-123	Public marking directory
1SV291	TOS	SOD-323	Public marking directory
2SC5435-EB	NEC ^*	SOT-523	Public marking directory
2SC5435EB	NEC	SC59	Public marking directory
BD45295G	ROHM ^*	SSOP-5	Public marking directory
P6SMB56CA	ON	DO-214AA	Public marking directory
R1114Q291D	RICOH ^*	SOT-143R	Public marking directory
SM4T150A	ST ^*	SOD-6	Public marking directory
2SC3617-K	—	SOT-89	Public marking directory
ASM162SCUS	—	SOT-143	Public marking directory
CD214A-T6.5CA	—	DO-214AC	Public marking directory
KIC7SZ125FU	—	SOT-353	Public marking directory
MM3Z9V1S	—	SOD-323	Public marking directory
MMBD4448TAPT	—	SOT-416 16df - 3a Chm	Public marking directory
P4SMAJ400A	—	DO-214AC	Public marking directory
P4SMAJ6.5AC	—	DO-214AC	Public marking directory
PT7M6314US28D3	—	SOT-143	Public marking directory
XC6127C30HNR	—	SSOT-24	Public marking directory
XC6215B182NR	—	SSOT-24	Public marking directory
XC6223D27BNR-G	—	SSOT-24	Public marking directory

How we narrow this down

Package first — SOT-23 vs SOD-123 vs SC-59 eliminates most candidates immediately.
Pin count and body size — a 3-pin SOT-23 LDO cannot be a 6-pin dual transistor.
Marking style — laser-marked parts are usually newer production; ink marking often indicates older or second-source vendors.
Circuits around it — a part sitting on a rail with an inductor is a regulator, not a diode.
Datasheet check — every credible candidate lists its marking scheme in the “marking information” section.

FAQ

Same code, several parts — which one do I actually have? Compare package + pin count + surrounding circuit; if it still fits two parts, request a sample verification before production.
Can I substitute between the candidates? No — the same marking may sit on electrically different parts. Always match the electrical spec sheet, not just the marking.
Where do these mappings come from? Public SMD marking directories and historical stock tables; each row keeps its source so you can trace it.

Other codes starting with “T”

T2 T3 T4 T5 TOK TT T8 TS T6 TE

Still not sure what the part is?

Send the code, package and a photo through the BOM hub — our engineers cross-check it against datasheets and sourcing records.

How these mappings are compiled: public SMD marking directories plus our own stock records. Each row keeps its original reference internally, so any mapping can be traced on request. ^* Manufacturer derived from the part-number family (some directory entries carry no manufacturer) — treat it as a lead, not a datasheet fact. Markings are indicative only — confirm with the physical batch marking and the original datasheet before ordering.